product banner


TRITON EPOXY INJECTION

A two-component, 100% solid epoxy resin catalyzed with a special polyamide curing agent. The unique low viscous compound is primarily designed for the all-around remedy of structural concrete defects and flaws, particularly the repair of cracks, ensuring tough and durable bonds and resistance to chemicals and corrosion. It can penetrate deep and permanently fill up voids, bridge cracks and seal off joints. It can be combined with aggregates or silica sand to result in an Epoxy Reinforced Mortar for high strength grouting.



USE
Buildings, columns, walls, pavement, pillars, and other hollow concrete structures.It can be used for bonding non-slip aggregates on concrete surfaces.





PRACTICAL COVERAGE
Clear- 8-10 m² @200-300µ (depends on the porosity of the substrate)

DRYING TIME
Initial Cure: 4 hours
Full Cure: 24 hours




FILM THICKNESS
*Refer to Technical Data Sheet for its Compressive Strength, Tensile Strength, and Flexural Strength



APPLICATION
Pressure Injection or Epoxy Grouting System

SHELF LIFE
Minimum two (2 ) years under normal condition

PACKAGING
Available in (3L) Gallon/set

SUBSTRATE

masonry

*Disclaimer: The information presented in the Technical Data Sheet is written to the best of our knowledge based on laboratory testing. We cannot guarantee the actual application results because of external factors beyond our control. We reserve the right to update the information provided without prior notification.*

*Disclaimer: The colors displayed in this section may not precisely reflect paint colors because of technical limitations. Please send us an inquiry on our Contact us page for assistance.*

TRITON EPOXY INJECTION

A two-component, 100% solid epoxy resin catalyzed with a special polyamide curing agent. The unique low viscous compound is primarily designed for the all-around remedy of structural concrete defects and flaws, particularly the repair of cracks, ensuring tough and durable bonds and resistance to chemicals and corrosion. It can penetrate deep and permanently fill up voids, bridge cracks and seal off joints. It can be combined with aggregates or silica sand to result in an Epoxy Reinforced Mortar for high strength grouting.



USE
Buildings, columns, walls, pavement, pillars, and other hollow concrete structures.It can be used for bonding non-slip aggregates on concrete surfaces.





PRACTICAL COVERAGE
Clear- 8-10 m² @200-300µ (depends on the porosity of the substrate)

DRYING TIME
Initial Cure: 4 hours
Full Cure: 24 hours




FILM THICKNESS
*Refer to Technical Data Sheet for its Compressive Strength, Tensile Strength, and Flexural Strength



APPLICATION
Pressure Injection or Epoxy Grouting System

SHELF LIFE
Minimum two (2 ) years under normal condition

PACKAGING
Available in (3L) Gallon/set

SUBSTRATE

masonry

*Note: Due to the different screen and light effect, the actual color in our color chart might be slightly different from the color shown.*